Steps to Make Cross Ear Cuffs

A cross ear cuff is really a wise method to decorate your ears having to break your financial allowance on new ear-rings. A wire wrapped cuff, made to grasp your ear above where an earring would relaxation, falls from your ear in loops and swirls. Creating your personal cuff enables you to definitely show your creativeness.

Sketch the look you need to create. This should help you organize your ideas before getting both hands dirty. When designing your cuff, bear in mind it should have a curve at the very top that attaches it towards the cuff.

Begin with roughly 2 1/2 " of wire. Pull the wire out and work with a set of wire blades.

File the finishes from the wire by having an emery board until they're smooth.

Measure 3/4 inch from both sides of the wire and mark a soft pencil.

Fold the wire in opposite directions each and every mark. Should you fold the very first mark forward to ensure that it lays on top, fold the 2nd underneath, creating an “S” shape. Make use of a knitting needle or pencil to produce loops inside your wire folds. You'll need a smooth circle as opposed to a sharp edge. Place the needle in the bend and push it toward the wire to complete the advantage.

Still work loops in to the wire before the piece matches your design. Use wire blades to trim excess wire out of your cuff. File any rough edges using the emery board.

Create a small loop towards the top of your piece.

Attach the wire wrap towards the cuff by placing the little loop around the wire piece in to the loop in your cuff. Use needle-nosed pliers to press around the wire loop and secure it towards the cross ear cuff.